| Part name | Material |
|---|---|
| Mainspring | Stainless steel for spring |
| Bracket | SPC trivalent chromate |
| Wire | SUS nylon-coated product |
| Mainspring case | PP |
| Wire terminal | Brass |
Top view
Front view
Side view
Bottom view
Features
- There are six wire output types from 4.9 N (0.5 kgf) to 29.4 N (3.0 kgf).
- The wire can be pulled out in one of eight directions. Specify the desired one when ordering it.
- The wire output is adjustable. For how to adjust it, there is a separate instruction manual available.
- This product has two mounting surfaces, which can be tailored to your application.
Order specification
Wire pull-out direction
MSW-A Type standard
Standard products are available in various dimensions. Please select the relevant product from the list below. If the corresponding standard product is not available, we will respond with a custom-made product.
Output
| Model number | CAD | Wire outputN | Wire outputkgf | Wire strokemm | Maximum adjustment output (reference value)N/number of rotations |
Maximum adjustment output (reference value)kgf/number of rotations |
Minimum adjustment output (reference value)N/number of rotations |
Maximum adjustment output (reference value)kgf/number of rotations |
|---|---|---|---|---|---|---|---|---|
| MSW-A0.5 | CAD | 4.9 | 0.5 | 1500 | (6.86/6 rotations) | (0.7/6 rotations) | (3.92/-1 rotations) | (0.4/-1 rotations) |
| MSW-A1.0 | CAD | 9.8 | 1.0 | 1500 | (11.76/4 rotations) | (1.2/4 rotations) | (8.82/-1 rotations) | (0.9/-1 rotations) |
| MSW-A1.5 | CAD | 14.7 | 1.5 | 1500 | (16.66/2 rotations) | (1.7/2 rotations) | (13.72/-1 rotations) | (1.4/-1 rotations) |
| MSW-A2.0 | CAD | 19.6 | 2 | 1500 | (19.6(not adjustable)) | (2.0(not adjustable)) | (18.62/-1 rotations) | (1.9/-1 rotations) |
| MSW-A2.5 | CAD | 24.5 | 2.5 | 1500 | (24.5(not adjustable)) | (2.5(not adjustable)) | (23.52/-1 rotations) | (2.4/-1 rotations) |
| MSW-A3.0 | CAD | 29.4 | 3 | 1500 | (29.4(not adjustable)) | (3.0(not adjustable)) | (28.42/-1 rotations) | (2.9/-1 rotations) |
* Output tolerance -10% / +10%
* The output is the value at the 10 mm point of the return stroke.
* The maximum adjustment output / number of rotations is the value obtained when a stroke of 1,500 mm is used.
* The product specifications are subject to change without prior notice. Thus contact us before ordering.