Used for a lot of cases of, for example, cigarette packs, cosmetics, food, pharmaceuticals, stationery, and miscellaneous goods. The products are always displayed on the front without manual forward-feed work.
Fixed package products
Aluminum-packaged food
Cheer pack pouches
Canned and glass/plastic bottled beverage products
Standard type
For a wide variety of products
For narrow products
(Patent Application 2010-213444)
Easy first-in-first-out
Supply from the front
Supply from behind
Multiple types of springs are available. If you can lend us one face (row) of products to be subjected to forward feed, we can select a suitable spring.
The products on the front can always be aligned at the same height.
The front product hops up and is easy to take out.
If you need an AL rail, let us know the inside dimensions of the case.
* When putting the products into the case, make sure that the front of the unit (pin part side) touches the inner surface of the case and a space of 2 to 6 mm is kept at the rear.
Total length of Small Dispenser Unit = Case inner size -2 to -6 mm AL rail length = Case inner size -8 to -12mm (or -29 to -33 mm if the end stopper is used)
The delivered DU-3 and DU-5 products have a total of two double-sided seals attached to the front and rear of the AL rail. (DU-5 has one additional seal.)
The push plate can be stopped at the rear during resupply of products (available for push plates W and S).
* When using the end stopper, paste the attached double-sided seal across the AL rail and end stopper.
* If you procure a molded case, we can provide the product with parts (1) and (2) combined. If so, consult with us.
* The product specifications are subject to change without prior notice. Thus contact us before ordering.