| Part name | Material |
|---|---|
| Mainspring | Stainless steel for spring |
| Bracket | SPC trivalent chromate |
| String | Nylon fiber |
| Mainspring case | POM |
| Terminal | C1020 tin plating |
| Output adjustment drum | POM |
Feature
- There are four wire output types: 0.25 kgf to 1.00 kgf.
- The standard stroke is 1,500 mm. Stroke is the sum of the draw-out length of the cord (working allowance) and the installation length.
- This product has two mounting surfaces, which can be tailored to your application.
- The wire can be pulled out in one of three directions. Specify the desired one when ordering it.
- Grease leakage is improved and also environmentally friendly.
- The output can be adjusted in the strong direction by wrapping the string around the output adjustment drum at the end of the string. (Output adjustable specification (OA))
- The output adjustment drum has an over-adjustment prevention hole to avoid damage or trouble in the main unit.
Basic specification
Top view
Main view
Output adjustable specification(OA)
Top view
Main view
Bottom view
Movie
Order specification
- Basic specification MSW-XS[※a] – 1,500 – [※b]
- Output adjustable specification(OA)MSW-XS[※a] – 1,500 – [※b] -OA
※a：drawing force
※b：Wire pull-out direction (See next figure)
Wire pull-out direction
Caution
-
Please specify the direction of string pullout when ordering. Do not change it on the user's side after shipment.
- The wire should be wrapped around the circumference of the drum, at least halfway around.
MSW-XS type standard
Standard products are available in various dimensions. Please select the relevant product from the list below. If the corresponding standard product is not available, we will respond with a custom-made product.
| Model number | Wire outputN | Wire outputkgf | Standard strokemm | Maximum adjustment output (reference value)(OA only)N/number of rotations |
Maximum adjustment output (reference value)(OA only)kgf/number of rotations |
Life（Reference value）times |
|---|---|---|---|---|---|---|
| MSW-XS0.25 | 2.45 | 0.25 | 1500 | (2.84) | (0.29) | (200,000) |
| MSW-XS0.5 | 4.9 | 0.5 | 1500 | (5.68) | (0.58) | (200,000) |
| MSW-XS0.7 | 6.86 | 0.7 | 1500 | (7.55) | (0.88) | (200,000) |
| MSW-XS1.0 | 9.8 | 1 | 1500 | not adjustable | not adjustable | (200,000) |
* Output tolerance -10% / +10%
* Please consult with us if you have any requests for a different standard outgoing force, and we will respond with a custom-made product. With the same housing and dimensions as MSW-XS, the output range is [2.45N (0.25kgf) to 9.8N (1.0kgf)].
* The output is the value at the 50 mm point of the return stroke.
* The maximum adjustment output is the value obtained when a stroke of 1,500 mm is used.
* The output adjustment specification applies to 0.25kgf, 0.5kgf, and 0.7kgf. 1.0kgf has no output adjustment specification.
* The product specifications are subject to change without prior notice. Thus contact us before ordering.