|
Part name |
Material |
|---|---|
|
CONSTON spring |
Stainless steel for spring |
|
Bracket |
SUS |
|
Wire support |
SUS |
|
Shaft |
SUS |
|
C-shaped retaining ring |
SUS |
|
Wire |
SUS nylon-coated product |
|
*1 D3 drum |
Plastic or AL |
|
*1 D4 drum |
Plastic or AL |
|
Wire drum |
POM |
|
D3 collar |
POM |
|
*2 Bracket collar |
POM |
|
*3 Bushing |
ABS |
|
Tip mounting plate |
SPC trivalent chromate |
|
*3 Grommet |
Rubber |
|
Cushion ball |
Rubber |
*1 Contact us for the material for the applicable product.
*2 The bracket collar is used for NWG 8.0-1 to 15.0-1.
*3 NWG15.0-1 uses the bushing. The others use the grommet.
Top view
Main view
Wire pull-out direction
The standard is pulling out to the
right (R) (as shown on the left).
NWG Type standard product
Standard products are available in various dimensions. Please select the relevant product from the list below. If the corresponding standard product is not available, we will respond with a custom-made product.
Output
| Model number | CAD（R） | CAD（L） | wire outputN | wire outputkgf | wire strokemm | Life (reference value)times |
Dimensions Lmm | Dimensions W1mm | Dimensions W2 (reference value)mm |
Dimensions W3mm | Dimensions W4mm | Dimensions W5mm | Dimensions Hmm | Dimensions G (reference value)mm |
Dimensions tmm |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| NWG 4.0-1-R (or -L） | CAD | CAD | 39.2 | 4.00 | 1000 | -6,000 | 135 | 73 | -81 | 48 | 77 | 79 | 80 | -41 | 1.5 |
| NWG 5.0-1-R (or -L） | CAD | CAD | 49 | 5.00 | 1000 | -6,000 | 135 | 83 | -91 | 58 | 87 | 89 | 80 | -41 | 1.5 |
| NWG 6.0-1-R (or -L） | CAD | CAD | 58.8 | 6.00 | 1000 | -6,000 | 135 | 93 | -101 | 68 | 97 | 99 | 80 | -41 | 1.5 |
| NWG 7.0-1-R (or -L） | CAD | CAD | 68.6 | 7.00 | 1000 | -6,000 | 135 | 103 | -111 | 78 | 107 | 109 | 80 | -41 | 1.5 |
| NWG 8.0-1-R (or -L） | CAD | CAD | 78.4 | 8.00 | 1000 | -6,000 | 192 | 74 | -82 | 48 | 78 | 84 | 105 | -56 | 2 |
| NWG 10.0-1-R (or -L） | CAD | CAD | 98 | 10.00 | 1000 | -6,000 | 192 | 84 | -92 | 58 | 88 | 94 | 105 | -56 | 2 |
| NWG 12.0-1-R (or -L） | CAD | CAD | 117.6 | 12.00 | 1000 | -6,000 | 192 | 94 | -102 | 68 | 98 | 104 | 105 | -56 | 2 |
| NWG 15.0-1-R (or -L） | CAD | CAD | 147 | 15.00 | 1000 | -6,000 | 192 | 104 | -112 | 78 | 108 | 114 | 105 | -56 | 2 |
* Output tolerance -0% / +15%
* The output is the value at the middle point of the return stroke.
* The output is the value resulting after setting, or conditioning operation. (See page 13.)
* The product specifications are subject to change without prior notice. Thus contact us before ordering.