Spring pressure ≦ total weight of products
The products dose not move.
This is a plastic product forward-feed spring that helps “front alignment” of the products suspended on a single hook.
1. When products are fully stored …
2.When products start being sold …
Spring pressure ≧ total weight of products
When you take out the frontmost product, the spring pushes the succeeding ones from behind.
3.When there is one product left …
Spring pressure = total weight of products
Even when only one product left, it will be placed in a position where it is easy to see and take out.
To prevent unsold products
Hook stick equipped with Line Pusher®
Conventional single-hook display fixtures
| Model number | Examples |
|---|---|
| φ6-30 | Light products such as toothbrush |
| φ6-40 | Candy bag pack |
| φ6-50 | Camera battery |
| φ6-60 | Heavy products such as AA alkaline batteries |
| Number of mountains | 6, with stopper |
|---|---|
| Total width | 14mm |
| Total length | (130) mm (initial length) |
| Pushing stroke | 120 mm (initial value) |
| Material | Polyacetal (POM) |
| Stick diameter | For φ6mm only |
|---|---|
| Stick length | > 130 mm * Check the hook stick diameter. |
* You can order 100 or more pieces per product type.
* The product specifications are subject to change without prior notice. Thus contact us before ordering.
Notes
- The larger the branch number of the model number, the stronger the pushing force.
- The products applicable to the above model numbers are only for reference. Perform a test using the actual Line Pushers before selecting the optimal model number.
- If the stopper is 120 mm or more away from the tip of the hook stick, no product will be pushed down when the Line Pusher is fully extended. (By moving the stopper back and forth, adjust so that the product does not hop out.)
- If the Line Pusher is left contracted for a long period of time, the restoration length will shorten. Thus, adjust it by moving the stopper forward.
- Because the hinge is thin, bending or twisting may cause damage.